SO Series Valves
Single solenoid, 2-position, spring return. Spool returns to original position when solenoid is de-energized. This operator style will operate reliably on line pressures from 160 PSI down to 50 PSI. If the line pressure is 160 PSI to 250 PSI or less than 50 PSI to 28" Hg, then the solenoid operator must be configured to use an "External Pilot" source.
Selected
Not Availible
| Body Styles (resets all options) | |
|---|---|
| Side Ported | |
| 2 | 1/4" NPTF |
| 3 | 3/8" NPTF |
| 4 | 1/2" NPTF |
| 6 | 3/4" NPTF |
| 8 | 1" NPTF |
| 12 | 1-1/2" NPTF |
| Subplate Mounted | |
| 3P | 3/8" flow |
| 4P | 1/2" flow |
| 8P | 1" flow |
| 16P | 1-1/2 flow |
| Prefix Options | |
|---|---|
| STD | Standard body material |
| B | "B"-Series Stack |
| Coil Options | |
|---|---|
| STD | Default coil configuration |
| ED | ISO 4400 DIN |
| M | Mold-over |
| X | Explosion proof |
| Valve Options | |
|---|---|
| blank | No options selected (click to clear options) |
| O | Twist locking solenoid override (most common) |
| ON | Twist non-locking solenoid override |
| OP | Push non-locking solenoid override |
| T | Tapped exhaust (Explosion proof already tapped) |
| L | Dust excluder solenoid nut |
| K | Threaded spool indicator pin (body styles 2, 3 and 3P only) |
| OS | Push/Pull non-locking spool override (body styles 2, 3 and 3P only) |
| Z | External pilot |