SS Series Valves
Double solenoid, 2-position, no springs. Spool shifts and remains shifted when one solenoid or the other is momentarily or continuously energized. Standard models are assembled for "Internal Pilot" operation. This operator style will operate reliably on line pressures from 160 PSI down to 25 PSI. If the line pressure is 160 PSI to 250 PSI or less than 25 PSI to 28" Hg, then the solenoid operator must be configured to use an "External Pilot" source.
Selected
Not Availible
| Body Styles (resets all options) | |
|---|---|
| Side Ported | |
| 2 | 1/4" NPTF |
| 3 | 3/8" NPTF |
| 4 | 1/2" NPTF |
| 6 | 3/4" NPTF |
| 8 | 1" NPTF |
| 12 | 1-1/2" NPTF |
| Subplate Mounted | |
| 3P | 3/8" flow |
| 4P | 1/2" flow |
| 8P | 1" flow |
| 16P | 1-1/2 flow |
| Prefix Options | |
|---|---|
| STD | Standard body material |
| B | "B"-Series Stack |
| Coil Options | |
|---|---|
| STD | Default coil configuration |
| ED | ISO 4400 DIN |
| M | Mold-over |
| X | Explosion proof |
| Valve Options | |
|---|---|
| blank | No options selected (click to clear options) |
| O | Twist locking solenoid override (most common) |
| ON | Twist non-locking solenoid override |
| OP | Push non-locking solenoid override |
| T | Tapped exhaust (Explosion proof already tapped) |
| L | Dust excluder solenoid nut |
| K | Threaded spool indicator pin (body styles 2, 3 and 3P only) |
| OS | Push/Pull non-locking spool override (body styles 2, 3 and 3P only) |
| Q | Spool detent (body styles 2, 3 and 3P only) |
| Z | External pilot |