ESY Series Valves
Double solenoid, 3-position, spring centered. Spool is centered when both solenoids are de-energized. Standard models are assembled for "Internal Pilot" operation. This operator style will operate reliably on line pressures from 150 PSI down to 50 PSI. If the line pressure is 150 PSI to 250 PSI or less than 50 PSI to 28" Hg, then the solenoid operator must be configured to use an "External Pilot" source.
Selected
Not Availible
| Body Styles (resets all options) | |
|---|---|
| Side Ported | |
| 2 | 1/4" NPTF |
| 3 | 3/8" NPTF |
| 4 | 1/2" NPTF |
| 6 | 3/4" NPTF |
| 8 | 1" NPTF |
| 12 | 1-1/2" NPTF |
| Subplate Mounted | |
| 3P | 3/8" flow |
| 4P | 1/2" flow |
| 8P | 1" flow |
| 16P | 1-1/2 flow |
| Prefix Options | |
|---|---|
| STD | Standard body material |
| Z | Brass Body |
| N | Namur Style |
| B | "B"-Series Stack |
| Spool Configuration | |
|---|---|
| STD | Closed center, all ports are blocked in the center position |
| D | Regenerative center, ports 2 and 4 are connected to port 1, ports 3 and 5 are blocked |
| G | Float center, port 2 is connected to port 3, port 4 is connected to port 5, port 1 is blocked |
| Coil Options | |
|---|---|
| STD | Default coil configuration |
| A | Intrinsically safe |
| H | High temperature |
| J | Mold over |
| M | Flying lead |
| T | ATEX |
| X | Explosion proof |
| Valve Options | |
|---|---|
| blank | No options selected (click to clear options) |
| O | Twist locking solenoid override |
| C | Side exhaust coil nut |
| L | Dust excluder coil nut |
| Z | External Pilot |