7114 Harry Hines Blvd.
Dallas, Texas 75235
Understanding the Jiffy Data Page
Jiffy-Drill is the light, powerful, and compact answer to production drilling, reaming, spot facing, and similar operations. The torque is limited mostly by the drive style chosen. The RPM of the unit is determined by the drive style, and should be limited to less than 5000 rpm to reduce bearing wear and overheating. The feed cylinder extension area is 3.15 in2, and the retraction area is 1.37 in2. The smaller retraction area increases the retraction speed. The feed cylinder should not be used in a meter out system, this will cause failure of the feed cylinder front end.
Stroke Length: 0 to 3-1/2" Maximum.
Feed Location: Right side of unit.
Use the combination of the dimensional prints for the main unit, spindle and drive style to determine the overall dimensions and to generate a CAD model.
RPM Range*: 314 - 2255
Torque Range*: 6 - 149 in-lbs
Fluids: Premium quality, anti-wear type hydraulic oil.
Temperature: -30°F to 130°F
For best motor life, run a new motor for 1 hour at 30% of rated pressure before application to full load. Be sure motor is filled with hydraulic fluid prior to any load applications.
*RPM and Torque are affected by the pressure and GPM of the hydraulic fluid. Actual RPM and Torque may be different than what is shown in the tables.