Jiffy Drill Parts and Repair Kits - AAA Products International
AAA Products International Inc.
7114 Harry Hines Blvd.
Dallas, Texas 75235
214-357-3851

Parts and Repair Kits

Parts Drawings and Information

For parts and dimensional drawings please use the Product Selector to get information about your specific model.

Recommended Spare Parts

At least one spare limit switch (part number J-318) should be kept on hand. In an emergency, the deceleration limit switch, if not used, can be substituted as a replacement for one of the other switches.

When replacing a limit switch, transfer one wire at a time from the old to the new switch, to avoid the possibility of getting the new switch wired incorrectly.

Locating Unit Serial Number

The unit serial number is located on the right side of the unit when looking at the spindle end. Be aware that the covers between units are interchangeable. Therefore, the part number on the cover may not be the correct part number of the unit. Consult the factory for determining the exact part number of your unit or locating the serial number. Serial number may be required when ordering replacement parts.

Seal Kits

Seal kits are available from your local distributor or the factory. Be prepared to supply unit serial number to determine proper seal kit number.

  • RKJD-1: Complete soft seal kit for serial numbers up to 577Ql. (Units purchased prior March, 1986.)
  • RKJD-2: Complete soft seal kit for serial numbers starting with 578Q3.

Hydraulic Motor Kits

Seal kits are available from your local distributor or the factory. Be prepared to supply unit serial number to determine proper seal kit number.

  • RKMM: Includes seals and instructions for replacing worn out or broken seals for all sizes of M-Series motors.
  • RKMA: Includes seals and instructions for replacing worn out or broken seals for all sizes of A-Series motors.
  • RKMB: Includes seals and instructions for replacing worn out or broken seals for all sizes of B-Series motors.

Reference Additional Maintenance Information