AAA Products International Inc.
7114 Harry Hines Blvd.
Dallas, Texas 75235
214-357-3851

Understanding the Jiffy Data Page

The data for each unit selected is broken down into three sections plus options. Each section is combined to complete a Jiffy unit. Please use dimensional, parts and STP files from each section to complete the unit.

No Spindle

The no spindle option provides a drive shaft, standard bearing, bearing retainer and tapered pin. The customer provides a spindle that will mate with the drive shaft. The correct dimensions and tolerances are provided in the dimensional print for this spindle style. We manufacture several spindles per customer specifications. Consult factory for additional options.

Basic Unit

Jiffy-Drill is the light, powerful, and compact answer to production drilling, reaming, spot facing, and similar operations. The torque is limited mostly by the drive style chosen. The RPM of the unit is determined by the drive style, and should be limited to less than 5000 rpm to reduce bearing wear and overheating. The feed cylinder extension area is 3.15 in2, and the retraction area is 1.37 in2. The smaller retraction area increases the retraction speed. The feed cylinder should not be used in a meter out system, this will cause failure of the feed cylinder front end.
Stroke Length: 0 to 3-1/2" Maximum.
Feed Location: Right side of unit.

Use the combination of the dimensional prints for the main unit, spindle and drive style to determine the overall dimensions and to generate a CAD model.

M-2 Motor

The M-2 hydraulic motor has a displacement of 1.21 in.3/rev. The B-Series motors are economical, efficient, small and powerful. These motors are designed for medium duty applications. Industry proven spool valve design combined with state-of-art gerollors. In addition, direction of shaft rotation and shaft speed can be controlled easily and smoothly throughout the speed range of the motor. The complete range of RPM and torques can be found in the motor literature.
RPM Range*: 189 - 1043
Torque Range*: 32 - 328 in-lbs
Fluids: Premium quality, anti-wear type hydraulic oil.
Temperature: -30°F to 180°F
For best motor life, run a new motor for 1 hour at 30% of rated pressure before application to full load. Be sure motor is filled with hydraulic fluid prior to any load applications.

*RPM and Torque are affected by the pressure and GPM of the hydraulic fluid. Actual RPM and Torque may be different than what is shown in the tables.
AAA Products International