AAA Products International Inc.
7114 Harry Hines Blvd.
Dallas, Texas 75235
214-357-3851

Data for 309V

The 309V valve is a special piggy back solenoid assembly. The solenoid seat orifice is 3/32 diameter instead of the standard 0.041 diameter.

Details

"Classic" Operator & Coil - Standard w/Tapped Exhaust

The "Classic" solenoid operators sturdy and tough construction with a 1/2" NPT conduit connection. The stem exhaust is tapped 1/8" NPTF. Voltage must be specified when ordering valves that use this operator. If no voltage is specified, then 120/60 is provided. Other voltages not shown below are available. Coil can be rotated in any direction on operator stem when space is available. Caution must be used when rotating coil so not to untighten the stem from the adaptor block. Standard leads are 18", longer leads available on request. When connecting to an electrical source either black wire can be connected to hot (+) and the other connected to neutral (-).
Voltage Pick-Up Holding Resistance Operator Spare Coil*
24 volts, 60 Hz 1.72 amps 1.10 amps 5.39 ohms AY-38T-4 V-67-4AY-38T AY-38T
AY-38
120 volts, 60 Hz 0.36 amps 0.23 amps 135 ohms AY-38T-11 V-67-11
240 volts, 60 Hz 0.18 amps 0.12 amps 546 ohms AY-38T-17 V-67-17
12 volts D-C 1.20 amps 12.8 ohms AY-38T-5 V-67-5
24 volts D-C 0.58 amps 61 ohms AY-38T-8 V-67-8

Materials: Steel, stainless steel, thermoset polyester molded resin coil, Buna-N seat & O-Ring.
Repair Kit: RKPSV-1 includes plunger, spring & O-Ring.
Ambient Temperature: -4°F to +120°F.
Relative Duty Cycle: 100%.
Degree of Protection: NEMA 1.
Voltage Tolerance: ± 10%.
Resistance Tolerance: ± 8% at 20°C.
Orifice Size: 3/64" base, 1/16" stem.
Insulation Class: B
*Coils: The encapsulated coils are UL approved. The coil is marked or embossed with QC130, QC155, or QC180. UL Document.
AAA Products International