AAA Products International Inc.
7114 Harry Hines Blvd.
Dallas, Texas 75235
214-357-3851

Data for SP274

Print
The SP274 is a special subpltate. 1/2" NPTF subplate connection base for the mounting of and connection to, 1/2" size subplate type valves. Connection ports are located on the sides of the subplate. No mounting hardware or seals are supplied with the subplate. O-rings and valve mounting screws are furnished with each subplate type valve. Additional 1/8" NPTF cylinder ports (ports 2 & 4) are available on the sides of the subplate.

Details

Dimension PDF
Porting: Inlet, two exhausts and two cylinder ports tapped into sides of subplate, with top detail for subplate style valve. Remote pilot ports are included on side.
Usage: Designed specifically for remote pilot valves(ex. RO4P). Additional 1/8" NPTF cylinder ports (ports 2 & 4) are available on the sides of the subplate.
Material: 6061-T6 aluminum.
Weight: 2.4 lbs.
SP274
SP274

General - Installation & Maintenance

Valves should be installed with reasonable accessibility for service. Exercise care in keeping tubing lengths to a minimum. Plumbing should be free of contamination. Pipe joint compound should be used sparingly applied only to the thread, never the valve body. Over tightening of pipe threads can fracture the joint causing leaks or failure. Protect the valve from exposure to extreme temperatures, dirt and moisture to maximize life.
Bulletin A-113: Operating & Maintenance Instructions.
Installation: Valve Fitting Installation.

⚠ WARNING:These products can expose you to chemicals which is(are) known to the State of California to cause cancer or reproductive harm. For more information, go to www.P65Warnings.ca.gov. Contact us for specific chemicals or materials used in a product.
AAA Products International