HW Series Valves
3-position, positive detent in position 'C', spring return from position 'A' to center position 'B'. When the lever is pushed over the valve body, the lever will remain in position when released. When the lever is pulled away from the valve body, the lever will spring to center position.
Selected
Not Availible
| Body Styles (resets all options) | |
|---|---|
| Side Ported | |
| 2 | 1/4" NPTF |
| 3 | 3/8" NPTF |
| 4 | 1/2" NPTF |
| 6 | 3/4" NPTF |
| 8 | 1" NPTF |
| Subplate Mounted | |
| 3P | 3/8" flow |
| 4P | 1/2" flow |
| 8P | 1" flow |
| Prefix Options | |
|---|---|
| STD | Standard body material |
| Z | Brass Body |
| N | Namur Style |
| B | "B"-Series Stack |
| Spool Configuration | |
|---|---|
| STD | Closed center, all ports are blocked in the center position |
| D | Regenerative center, ports 2 and 4 are connected to port 1, ports 3 and 5 are blocked |
| G | Float center, port 2 is connected to port 3, port 4 is connected to port 5, port 1 is blocked |
| Valve Options | |
|---|---|
| blank | No options selected (click to clear options) |
| BL | Bent lever - left (when viewed from the front of handle) (body styles 2, 3 and 3P only) |
| BR | Bent lever - right (when viewed from the front of handle) (body styles 2, 3 and 3P only) |
| C | Curved handle (body styles 2, 3, 3P, 4 and 4P only) |
| H | Heavy duty stainless steel end cap (body styles 2, 3 and 3P only) |
| J | Red knob (body styles 2, 3 and 3P only) |
| R | Handle orientation rotated 90 degrees toward 2-port side |
| T | Handle orientation rotated 180 degrees toward base of valve (body styles 2, 3, 4, 6 and 8 only) |
| RT | Handle orientation rotated 270 degrees toward 3-port side |
| SS | Stainless steel construction (body styles 2 and 3 only) |